audio-talk

weighs a ton

Finally think I’ve got somewhere. It’s been a long trek since post #1 in 2018. I’ve had 18 months off due to a rude interruption with mortality, and since revisiting I’ve also had some component failures. After chasing a fault, and exhaustive changing of every component on 1 channel, I finally found...

I'd completely forgotten about this. here's that mofo I did with opa2134 and 3 tx buffer. I've got it apart at the mo because I've got serious distortion on one channel...and I'm sweating trying to find the cause...the bottom half of the wave goes all fuzzy..on the scope signal is clean out of the o...

I've been updating and downsizing so my beloved echo layla has got to go and is free to anybody who would like it. It's a prosumer studio grade digital interface with 10 in, 10 out, midi in and out, word clock and spdif in and out. down side: it needs a pci slot(original type) and the phantom power ...

I have a Grandstream HT801 as a trial with Voipfone at the moment using our existing analog Panasonic DECT phones and will switch to a full VoIP system sometime in the next few months (not too many shocks to the system at the same time for SWMBO). not sure if this is relevent to you jack but..........

Mine is a panasonic dect which I was glad to keep because we have 3 satellites. the grandstream is also ht801 and I cant justify changing it because it's been seamless.

The only thing I keep tripping up on is that it needs the std code for local calls....I'm sure I'll get astride that in time.

Anyone here switched from POTS (copper) home phone to VoIP and kept their old number? I kicked karoo(kcom) out in march which meant losing the karoo phone. The new ISP allowed me to keep my router so I bought a grandstream voip interface and plugged the existing panasonic digiphones into it. Karoo ...

last christmas I bought a secondhand laptop to do some recording away from the studio, the bella tapes. It occurred to me that I might resurrect the amp testing stuff using this laptop. I was intending to do the testing on the mofo, which I have decided to finish, despite the setbacks. So I used the...

biblical rain here...

in the last 30 mins we've had 15mm..at one point for 5 minutes it was coming at 38mm per hour.

and here is the original mofo...
I seem to have lost the plot

mmmm...

last installment, I hope...

Just checking Ed when you say film stencil do you mean the cut sheet for applying paste or the solder resist mask on a PCB. I find having a metal paste stencil makes life many many times simpler when using a hot air gun. I would imagine using one and a oven would almost become trivial. yes, the cut...

thanks guys I think I'll stick to through hole if I ever do another amp. The method Ray outlined with the rework is the method I used but to make it work I reckoned I needed film stencils to avoid bridges. Nick did my first breakout for me and I had to remove a couple of bridges with wick, it was at...