Custom toroids.

We all start somewhere
Post Reply
User avatar
pre65
Amstrad Tower of Power
Posts: 19518
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex

#1 Custom toroids.

Post by pre65 »

I've been talking to a toroidal transformer manufacturer about an 800v 400va transformer.

They have suggested that, as it's for audio use, they wind it on a 500va core, which is OK.

Question is, the transformer I might have ordered from Antec (in USA) would have had 2 x 400v secondarys, so is that way any better (or worse) than 1 x 800v secondary ?

It would be used with a hybrid bridge so a centre tap would not be needed.
Life is what happens to you while you're busy making other plans. John Lennon

G-Popz THE easy listening connoisseur. (Philip)
User avatar
Nick
Site Admin
Posts: 13630
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#2 Re: Custom toroids.

Post by Nick »

I would check if the insulation of the windings is rated for using them in series.
Little known fact, coherent thought can destructively interfere with itself leaving no thought at all, that’s why I prefer incoherent thought.
User avatar
Paul Barker
Oooo, Roberts Radio's sound nice
Posts: 7719
Joined: Mon May 21, 2007 9:42 pm

#3 Re: Custom toroids.

Post by Paul Barker »

“It would be used with a hybrid bridge so a centre tap would not be needed.”

If you used two 400 windings you have a centre tap.

The one you’re ordering you can ask for 800vct. (Centre tapped.)

Worth checking ratings and if you can’t find facts order you’re 800vct.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
Post Reply