A power supply for the Squeezebox
-
- Old Hand
- Posts: 693
- Joined: Sun Nov 09, 2008 2:06 pm
- Location: Manchester
#61
Well delays in getting my touch postponed the use of the regulator module but now up and running. Just need to get time to have a good listen.
TD-125/RB250/MC25FL & 'Snail' phono, NAS/SBT with CS4398 DAC, 41MP pre & MoFo Power, still messing with OBs.
- pre65
- Amstrad Tower of Power
- Posts: 21399
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#62
What was the outcome of this Squeezebox PSU as compared to the wall wart ?
You've had 4.5 years to make a decision.
You've had 4.5 years to make a decision.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- pre65
- Amstrad Tower of Power
- Posts: 21399
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#63
One thing I will need, regardless of what PSU i get, is a 5.5mm x 2.5mm plug to fit the Squeezebox.
There are 100s on e-bay, but are there any preferred types ?
There are 100s on e-bay, but are there any preferred types ?
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#64
Preferred
http://www.mains-cables-r-us.co.uk/main ... -plug.html
Adequate
http://www.rapidonline.com/Cables-Conne ... ug-20-0915
http://www.mains-cables-r-us.co.uk/main ... -plug.html
Adequate
http://www.rapidonline.com/Cables-Conne ... ug-20-0915
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
#66
You can pass 8A though the first connector, not the second. Not needed for a touch I guess, but they are a lot chunkier.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
-
- Shed dweller
- Posts: 2300
- Joined: Fri Aug 03, 2007 10:57 am
- Location: From the land of the Bodgers
#67
For £20 they probably feel & look reassuringly expensive but unnecessary for feeding power to a Touch. As an aside if I wanted to have a power handling of 8amp I think I'd go with a more mechanically sound type of connector.
- pre65
- Amstrad Tower of Power
- Posts: 21399
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#69
Yes, thanks Nick for answering my question.
I think I will go for adequate as a first iteration.
I think I will go for adequate as a first iteration.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#70
Been thinking about this, I will answer Neal's post again. They are preferred, because I prefer using them. If there is a committee I need to run my opinions past before posting them can someone point me to it?
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- pre65
- Amstrad Tower of Power
- Posts: 21399
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#71
The only committee I know is the talking bollocks session at Owston.
Does that count ?
If I were making a PSU for retail sale then the "posh" connector would be de rigueur.
Does that count ?
If I were making a PSU for retail sale then the "posh" connector would be de rigueur.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
#72
Yep, but I am worries that because I make things to sell, folk are now thinking I am suggesting costly things to make money. I didn't, and don't, I have used loads of the 60p ones and loads of the £20 ones, I prefer the £20 ones, the 60p ones work fine.pre65 wrote:The only committee I know is the talking bollocks session at Owston.
Does that count ?
If I were making a PSU for retail sale then the "posh" connector would be de rigueur.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- pre65
- Amstrad Tower of Power
- Posts: 21399
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#74
I agree.Ali Tait wrote:I doubt anyone that knows you would think that Nick.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
- Dave the bass
- Amstrad Tower of Power
- Posts: 12276
- Joined: Tue May 22, 2007 4:36 pm
- Location: NW Kent, Darn Sarf innit.
#75
Ditto, I wouldn't be worried Nick, a lot of us have known you for a while now and your advice has helped a lot of people get off the starting blocks and get making 'stuff' themselves which has been much appreciated. Whether you make money out of summat you're good at doesn't matter IMO, the final choice to buy a recommended item lies with the person with the dosh available to buy an item, it's up to them in the end innit.
FWIW, We get through maybe 50-100 DC plugs like this in a year in the workshop. A lot battery powered hand Pipettes use this type of plug to charge the internal battery via an AC adaptor. They often get damaged in some way. We're tried a load of different designs and suppliers over the last 17 years but recently we've found a good cheapish Japanese made brand, I think the boss got 'em from either RS or Farnell. Still plastic but better quality than some that melt when you get them within 2 ft of an soldering iron bit!
DTB
FWIW, We get through maybe 50-100 DC plugs like this in a year in the workshop. A lot battery powered hand Pipettes use this type of plug to charge the internal battery via an AC adaptor. They often get damaged in some way. We're tried a load of different designs and suppliers over the last 17 years but recently we've found a good cheapish Japanese made brand, I think the boss got 'em from either RS or Farnell. Still plastic but better quality than some that melt when you get them within 2 ft of an soldering iron bit!
DTB
"The fat bourgeois and his doppelganger"